ISSN : 2288-1484(Online)
식각액(Wet Etchant)제조공정의 품질향상을 위한 강건설계에 대한 연구
A study on the robust design for quality improvement of Wet Etchant manufacturing process
Abstract
- 19 최용석(155~165).pdf822.4KB
Reference
2. 동승훈, "성능특성이 다수인 경우의 파라미터의 설 계에 관한 연구" 석사학위논문, KAIST, 1990
3. 박상영, "다구찌실험계획법을이용한광학엔진모듈의 제 조공정 및 품질개선" 석사학위논문, 아주대학교, 2006
4. 박성현, "다구찌 방법을 중심으로 한 응용실험계획 법", 영지문화사, 1997.
5. 배영주, 김광수, 이진규, "EXTOPSIS 모형을 이용한 다중특성치의 파라미터 설계", 품질경영학회지, 제24권 제3호, pp. 111-132, 1996.
6. 서순근, 최종덕, "다성능특성치에 관한 안정성설계", 품질경영학회지, 제 22권 제3호, pp. 34-53, 1994.
7. 조석호, "플라스틱 압출공정의 생산시간 단축을 위 한 강건설계" 석사학위논문, 명지대학교, 2003
8. 조용욱, 박명규, "불확실한 환경하에서의 JIT시스템 강건 설계에관한연구" 안전경영과학회지제2권제2호, 2000
9. J. Ross Phillip, Taguchi Techniques for Quality Engineering, New York, McGraw-Hill, 1994.
10. Kacker, N.R."Off-Line Quality Control, Parameter Design and the Taguchi Method," Jounal of Quality Technology, Vol. 17, No. 4, 176-188, 1985.
11. P. j. Ross, Taguchi Techniques for Quality Engineering, McgrawHill, 1989.
12. S. Moghsoodloo, "The Exact Relation of Tagychi Signal-to-Noise Ratio to His Quality Loss Function", Journal of Quality Technology, Vol.22, pp. 55-67, 1990.
13. S. Phadke Madhav, Quality Engineering Using Robust Design, 1989.
14. www.dognjin.com
-
-
Online Submission
http://submission.koreasafety.or.kr
-
KSSM
The Korean Society of Safety ManagementWaste Society
-
Editorial Office
Contact Information- Tel: +82.31.336.2844
- Fax: +82.31.336.2845
- E-mail: safety@mju.ac.kr