ISSN : 1229-6783(Print)
ISSN : 2288-1484(Online)
ISSN : 2288-1484(Online)
Journal of the Korea Safety Management & Science Vol.15 No.2 pp.71-77
DOI : https://doi.org/10.12812/ksms.2013.15.2.71
DOI : https://doi.org/10.12812/ksms.2013.15.2.71
프레스 끼임 재해 사례분석을 통한 안전금형 모델 연구
A Study on safety die model through samples of the disaster analysis which gets jammed in
Received April 15, 2013; Revision Received June 11, 2013; Accepted June 11, 2013.
Abstract
The accident which is caused by the press work remains a Permanent obstacle in worker's hand or arms,the disaster ratio is high and the fatal case is many. Mainly Like this accident occurs because the hand toenter with inside of the press die, therefore, basic countermeasure is the safety press. In order to preventaccess to mechanical moving part by the hand or any part of the body , it is important to making a safetydie design Structurally. It presents the design of the safety press die with suitable structure in the Product'sattribute which it had shown in samples, There is a possibility of being difficult because the attribute ofsafety die design that had present all the productions from research does not agree each other. but becausethe representative process which is used most at sample had designed, If you were imitates with safety diedesign base which is presented from this research, It comes to be thought to be the part which can are usedat the various sides.
- 9 남승돈(71-77).pdf1015.8KB
Reference
1.Industrial Accidents Statistics, 2008
2.Lee, Choong–Ryeol, "A study on automated delivery device material of the press work", Occupational safety and health Research Institute, 1991
3.Lee, Choong–Ryeol, "Study of simple automation of transport equipment press operation material handling, and supply", Occupational safety and health Research Institute, 1992
4.Yun-sang geon, "Study of automated transport device press operation material handling, and supply", Occupational safety and health Research Institute, 1992
5.Three of the shin-uncheol, "Improvement development and Research Press dangerous machinery, equipment and structure", 2009
6. Eleven of the lee-geunoh, "Disaster prevention strategies and research use survey of the press",2009
7. Jeong-jaesu, "Studies on the safety management model and prevention of occupational accidents Press", Inha University Graduate School, 2002
8.BMA(독.일.연.방.노.동.사.회.성.), Arbeitssichererheitsgesetz, 1997.
9. OSHA, Industrial Safety and Health Act, Dec,29, 1970.
10. OSHA, OSHA Facts, 2002
11. Hammer, W. Occupational Safety Management and Engineering. Prentice-Hall Inc, Englewood Cliffs, New Jersey, 1976.
2.Lee, Choong–Ryeol, "A study on automated delivery device material of the press work", Occupational safety and health Research Institute, 1991
3.Lee, Choong–Ryeol, "Study of simple automation of transport equipment press operation material handling, and supply", Occupational safety and health Research Institute, 1992
4.Yun-sang geon, "Study of automated transport device press operation material handling, and supply", Occupational safety and health Research Institute, 1992
5.Three of the shin-uncheol, "Improvement development and Research Press dangerous machinery, equipment and structure", 2009
6. Eleven of the lee-geunoh, "Disaster prevention strategies and research use survey of the press",2009
7. Jeong-jaesu, "Studies on the safety management model and prevention of occupational accidents Press", Inha University Graduate School, 2002
8.BMA(독.일.연.방.노.동.사.회.성.), Arbeitssichererheitsgesetz, 1997.
9. OSHA, Industrial Safety and Health Act, Dec,29, 1970.
10. OSHA, OSHA Facts, 2002
11. Hammer, W. Occupational Safety Management and Engineering. Prentice-Hall Inc, Englewood Cliffs, New Jersey, 1976.
-
-
Online Submission
http://submission.koreasafety.or.kr
-
KSSM
The Korean Society of Safety ManagementWaste Society
-
Editorial Office
Contact Information- Tel: +82.31.336.2844
- Fax: +82.31.336.2845
- E-mail: safety@mju.ac.kr -
-
-
-
-
-
-
