ISSN : 1229-6783(Print)
ISSN : 2288-1484(Online)
ISSN : 2288-1484(Online)
Journal of the Korea Safety Management & Science Vol.15 No.4 pp.279-288
DOI : https://doi.org/10.12812/ksms.2013.15.4.279
DOI : https://doi.org/10.12812/ksms.2013.15.4.279
냉각팬 모터 제조공정의 품질개선에 관한 사례연구
A Case Study of Quality Improvement practice in Cooling Fan Motor Manufacturing
Received August 6, 2013; Revision Received December 19, 2013; Accepted December 19, 2013.
Abstract
The purpose of this study is to present a case study of six sigma quality improvement practice in coolingfan motor(CFM) manufacturing processes. In this study, the CFM manufacturing process of automobile partsnot relevant to the target process rate of the process point of view, in order to reduce the system to solve theproblem of localized resolution procedures of six sigma DMAIC methodology was applied to study.In conclusion , this study 's field D in order to improve the initial rate of inadequate quality management bestpractices by applying the method of Six Sigma quality CFM failure through stabilization schemes wereproposed cost reduction .To be CFM product to satisfy customers based on continuous monitoring of theeffective field of claims quality management system is required.
- 0060-01-0015-0004-33.pdf738.5KB
Reference
1.Young-Ju Bae(2009), "A Six Sigma Project for Reducing the Cost Copper Materials of the Cable Manufacturing", Journal of the Korea Safety Management & Science Vol.11:121-130
2.Hyuck-Moo Kwon, Jung-Taek Kim and Joon-Ho Choi(2000), " a Six Sigma project for Decreasing Waste Concrete in a Housing Construction Site", Journal of Quality Innovation Vol.1No.1 : 4-9
3.Sung-Hoon Hong, Sang-Boo Kim and Min-Koo Lee(1999), "Successes in Six Sigma", Journal of the Korean Society for Quality Management Vol 27 No.3 : 202-208
4.Sung-Uk Lim, Seong-Pil Yoon and Chang-Soo Kim(2006), " A Study on how to find new Project of Six Sigma", Journal of the Korea Safety Management & Science Vol. No.5 : 27-56
5.Fontenot, G., Banara, R., and Gresham, A.(1994) "Six Sigma in Customer Satisfaction", Quality Progress December : 73-76
6.Harry, M,J(1998), " Six Sigma : A Breakthough Strategy for rofitability", Quality Progress May : 60-64
7.Hoerl, R.W(1998), " Six Sigma and the Fu ture of the Quality Profession", Quality Prog ress July : 35-42
2.Hyuck-Moo Kwon, Jung-Taek Kim and Joon-Ho Choi(2000), " a Six Sigma project for Decreasing Waste Concrete in a Housing Construction Site", Journal of Quality Innovation Vol.1No.1 : 4-9
3.Sung-Hoon Hong, Sang-Boo Kim and Min-Koo Lee(1999), "Successes in Six Sigma", Journal of the Korean Society for Quality Management Vol 27 No.3 : 202-208
4.Sung-Uk Lim, Seong-Pil Yoon and Chang-Soo Kim(2006), " A Study on how to find new Project of Six Sigma", Journal of the Korea Safety Management & Science Vol. No.5 : 27-56
5.Fontenot, G., Banara, R., and Gresham, A.(1994) "Six Sigma in Customer Satisfaction", Quality Progress December : 73-76
6.Harry, M,J(1998), " Six Sigma : A Breakthough Strategy for rofitability", Quality Progress May : 60-64
7.Hoerl, R.W(1998), " Six Sigma and the Fu ture of the Quality Profession", Quality Prog ress July : 35-42
-
-
Online Submission
http://submission.koreasafety.or.kr
-
KSSM
The Korean Society of Safety ManagementWaste Society
-
Editorial Office
Contact Information- Tel: +82.31.336.2844
- Fax: +82.31.336.2845
- E-mail: safety@mju.ac.kr -
-
-
-
-
-
-
