ISSN : 1229-6783(Print)
ISSN : 2288-1484(Online)
ISSN : 2288-1484(Online)
Journal of the Korea Safety Management & Science Vol.15 No.4 pp.261-267
DOI : https://doi.org/10.12812/ksms.2013.15.4.261
DOI : https://doi.org/10.12812/ksms.2013.15.4.261
동기화 생산을 위한 조달물류 개선에 관한 연구
A Study on the improvement of procurement logistics for synchronous manufacturing
Received October 20, 2013; Revision Received December 5, 2013; Accepted December 5, 2013.
Abstract
In automobile company it is needed to establish the collaborative relationship between the assembly companyand the part manufacturing company. In this paper we established the improvement for the procurementlogistics and logistics in assembly company and thus we derived the near optimal procurement cycle throughthe simple EXCEL simulation and the improved inventory management method for H automobile company inCHINA. At this time we adopted the pull manufacturing process instead of push manufacturing process. Weresulted that the manufacturing activity of both companies was stabilized and the usage of storage area inassembly company was reduced by 50%, especially it was reduced by 100% in the case of directly deliveringthe parts to assembly line through the third party logistics company.
- 0060-01-0015-0004-31.pdf983.5KB
Reference
1.George A. Zsidisin, Lisa M. Ellram(2003), "An Agency Theory Investigation of Supply Risk M anagement", Journal of Supply Chain Manageme nt, 39:15-27. 
2.Hwang(2011), "Seung-jun, A Case Study of the Production and Logistics Integration for a Small and Medium-sized Manufacturing, Journal of the Korean Society of Supply Chain Management", 11:654-659.
3.George A. Zsidisin, Lisa M. Ellram(2003), "An Agency Theory Investigation of Supply Risk M anagement", Journal of Supply Chain Manageme nt, 39:15-27.
4.Hwang(2011), "Seung-jun, A Case Study of the Production and Logistics Integration for a Small and Medium-sized Manufacturing, Journal of the Korean Society of Supply Chain Management", 11:654-659.
5.Jeon Hyeonung(2011), "Supply Chain Manageme nt", Chang Rim Books.
6.Lee Gi-yeol, Jo Hyeon-bo, Jang Mu-yeong(2011), "Vehicle routing planning for inbound logistics base-on the multi-pass approach", The Korean Operations and Management Science Society.
7.Mun Hwa, Moon Huicheol, Hyeong Jeong(2008), "A Study on the Current Practices, Problems and Solutions in the SCM of Chinese Enterprises", CNU Journal of Management & Economics, 31:125-148.
8.Yon, Soon-Ho(2006), "A Case Study on the Logistics Strategies of Global Manufacturing Companies", Kaist Technology Management Prog ram, Master's Thesis.
2.Hwang(2011), "Seung-jun, A Case Study of the Production and Logistics Integration for a Small and Medium-sized Manufacturing, Journal of the Korean Society of Supply Chain Management", 11:654-659.
3.George A. Zsidisin, Lisa M. Ellram(2003), "An Agency Theory Investigation of Supply Risk M anagement", Journal of Supply Chain Manageme nt, 39:15-27.
4.Hwang(2011), "Seung-jun, A Case Study of the Production and Logistics Integration for a Small and Medium-sized Manufacturing, Journal of the Korean Society of Supply Chain Management", 11:654-659.
5.Jeon Hyeonung(2011), "Supply Chain Manageme nt", Chang Rim Books.
6.Lee Gi-yeol, Jo Hyeon-bo, Jang Mu-yeong(2011), "Vehicle routing planning for inbound logistics base-on the multi-pass approach", The Korean Operations and Management Science Society.
7.Mun Hwa, Moon Huicheol, Hyeong Jeong(2008), "A Study on the Current Practices, Problems and Solutions in the SCM of Chinese Enterprises", CNU Journal of Management & Economics, 31:125-148.
8.Yon, Soon-Ho(2006), "A Case Study on the Logistics Strategies of Global Manufacturing Companies", Kaist Technology Management Prog ram, Master's Thesis.
-
-
Online Submission
http://submission.koreasafety.or.kr
-
KSSM
The Korean Society of Safety ManagementWaste Society
-
Editorial Office
Contact Information- Tel: +82.31.336.2844
- Fax: +82.31.336.2845
- E-mail: safety@mju.ac.kr -
-
-
-
-
-
-
