ISSN : 1229-6783(Print)
ISSN : 2288-1484(Online)
ISSN : 2288-1484(Online)
Journal of the Korea Safety Management & Science Vol.16 No.2 pp.147-155
DOI : https://doi.org/10.12812/ksms.2014.16.2.147
DOI : https://doi.org/10.12812/ksms.2014.16.2.147
생산공정에 자재투입시 자재창고와 연동되는 WMS 모형
- 자동차 부품 제조업을 중심으로 -
A WMS Model Interfacing with Material Warehouse in Real Time in Puting Materials to Manufacturing Processes - in Automobile Parts Manufacturing Industry -
Received February 19, 2014; Revision Received June 13, 2014; Accepted June 16, 2014.
Abstract
This paper suggests a specific model that could efficiently improve the interaction and the interface betweenWMS(Warehouse Management System) terminal and PDA terminal through real time processing inmanufacturing shop.The proposed model shows that the new method can more efficiently perform to reduce processing time forshipping and receiving, compared with the current approach.As a result of the certain test among the main server, WMS system, and PDA terminal, it is noted in caseof the new proposed system that the effects of proposed model are as follows:
(a) While the receiving lead time for carrying by the current method was 2 hours, the receiving lead timeby the new method was 20 minutes.
(b) While the shipping lead time for carrying by the current method was 1 hours, the shipping lead time bythe new method was 15 minutes.
(c) While the inventory rate of accuracy by the current method was 85%, the inventory rate of accuracy bythe new method was 98%.
(a) While the receiving lead time for carrying by the current method was 2 hours, the receiving lead timeby the new method was 20 minutes.
(b) While the shipping lead time for carrying by the current method was 1 hours, the shipping lead time bythe new method was 15 minutes.
(c) While the inventory rate of accuracy by the current method was 85%, the inventory rate of accuracy bythe new method was 98%.
Reference
1.Young-Min Kim(2006), Logistics Management, HyunHak pub., Co.
2. Guang-Zhu Li,Chang-Ho Lee(2006), "A Study on the Develop-ment of the Web-based u-WMS using RFID", Journal of the Korea safety Manag ement & Science, vol. 8, No 3.
3. Seung-Ye Lee(2008), "A study on the constructi ons and Effects of Development for Warehouse Management System of Manufacture Enterprise", Master Degree, Graduate school of Engineering, Yonsei university.
4. Jing-Lun Zhang․oo-Yong Lee․ung- Hwan Jang․ung-Hee Yoo․hang-Ho Lee(2013), "A Stu dy on Development of WMS System for H Auto mobile Plant in China", Journal of the Korea safe ty Management & Science, vol. 15, No 1.
5. Ji-Eun Cho(2012), "Case study on the WMS introduction of small and medium-sized ware house companies and its effects", Master Degree, Graduate School of Maritime Industrial Studies, Korea Maritime university
2. Guang-Zhu Li,Chang-Ho Lee(2006), "A Study on the Develop-ment of the Web-based u-WMS using RFID", Journal of the Korea safety Manag ement & Science, vol. 8, No 3.
3. Seung-Ye Lee(2008), "A study on the constructi ons and Effects of Development for Warehouse Management System of Manufacture Enterprise", Master Degree, Graduate school of Engineering, Yonsei university.
4. Jing-Lun Zhang․oo-Yong Lee․ung- Hwan Jang․ung-Hee Yoo․hang-Ho Lee(2013), "A Stu dy on Development of WMS System for H Auto mobile Plant in China", Journal of the Korea safe ty Management & Science, vol. 15, No 1.
5. Ji-Eun Cho(2012), "Case study on the WMS introduction of small and medium-sized ware house companies and its effects", Master Degree, Graduate School of Maritime Industrial Studies, Korea Maritime university
-
-
Online Submission
http://submission.koreasafety.or.kr
-
KSSM
The Korean Society of Safety ManagementWaste Society
-
Editorial Office
Contact Information- Tel: +82.31.336.2844
- Fax: +82.31.336.2845
- E-mail: safety@mju.ac.kr -
-
-
-
-
-
-
