Journal Search Engine

to

Search Advanced Search Adode Reader(link)
Download PDF Export Citation Korean Bibliography PMC Previewer
ISSN : 1229-6783(Print)
ISSN : 2288-1484(Online)
Journal of the Korea Safety Management & Science Vol.19 No.4 pp.317-322
DOI : http://dx.doi.org/10.12812/ksms.2017.19.4.317

Critical heat flux measurement experiment to improve safety of copper nano-particle coated heat exchanger

Yong-Hyun Mo*,Nam-Jin Kim*,Yong-Han Jeon**,Deok-Soo Lee**
*Dept. of Nuclear & Energy Engineering, Jeju National Univ
**Dept. of Fire and Frotection, Sangji-Youngseo College
***Dept. of Industrial Engineering, Halla Univ
†Corresponding Author : Nam-Jin Kim, Dept. of Nuclear & Energy Engineering, Jeju National Univ., Jejudaehakro 102, Jeju, Jejudo.

Abstract

When the heat flux on the heating surface following changing heat condition in the boiling heat transfer system exceeds critical heat flux, the critical heat flux phenomenon is going over to immediately the film boiling area and then it is occurred the physical destruction phenomenon of various heat transfer systems. In order to maximize the safe operation and performance of the heat transfer system, it is essential to improve the CHF(Critical Heat Flux) of the system. Therefore, we have analysis the effect of improving CHF and characteristics of heat transfer following the nanoparticle coating thickness. As the results, copper nanocoating time are increased to CHF, and in case of nano-coatings are increased spray-deposited coating times more than in the fure water; copper nanopowder is increased up to 6.40%. The boiling heat transfer coefficients of the pure water are increased up to 5.79% respectively. Also, the contact angle is decreased and surface roughness is increased when nano-coating time is increasingly going up.

구리나노입자가 코팅된 열교환기의 안전성 향상을 위한 임계 열유속 측정실험

모용현*,김남진*,전용한**,이덕수***
*제주대학교 에너지공학과, **상지영서대학교 소방안전과, ***한라대학교 산업경영공학과

초록

Figure

Table

  1. SEARCH

  2. Online Submission

    http://submission.koreasafety.or.kr

  3. KSSM

    The Korean Society of Safety ManagementWaste Society

  4. Editorial Office
    Contact Information

    - Tel: +82.31.336.2844
    - Fax: +82.31.336.2845
    - E-mail: safety@mju.ac.kr